We want to hear from you and encourage a lively discussion among our users. Please help us keep our site clean and safe by following our posting guidelines, and avoid disclosing personal or sensitive information such as bank account or phone numbers. Any comments posted under NerdWallet's official account are not reviewed or endorsed by representatives of financial institutions affiliated with the reviewed products, unless explicitly stated otherwise.

how to repair garage door panel


This was the perfect example to how a business should be ran on every level. I called the owner at 545 am and not only spoke to him but scheduled for later that day. The technician arrived on time, was knowledgeable, personable, and professional. He explained the issue at hand and how to fix it with quality parts that will ensure the function of the door and, springs, and motor. I could not be happier with the experience and service. Rockstar garage door service is not just a great name, it's the truth. It would be foolish to give business to anyone else. And... if all of this wasn't enough. They cover all of San Diego County. Thanks guys!
  I have nothing but nice things to say about Turbo Garage Door!  I had my new garage door opener installed about a month ago and it's been working great until about a week or so ago.  All of a sudden the door started popping up right when it was almost down to ground closed.  I played with it and determined that a support beam on the door seemed to be interfering with the safety sensors.  I called Turbo Garage Door for help and they were able to come out the next day.  And help they did!  The tech found the problem right away, and with a couple of well placed screws, the door was working great once again.  The problem was with the door, not the equipment that they installed, but they came out to solve the problem for me.  I would recommend Turbo Garage Door in a hot New York second!
Installing an overhead garage door requires a few tools and a friend to help. First, the lower door panel needs to be set up in the center of the doorway. The remaining panels and tracks are held in place with hinges, brackets, and screws. Set up an easy-to-install torsion spring system to ensure that your door lifts properly for many years to come.

sears garage door repair service


Annual maintenance. Make an annual check of all nuts and bolts on rails and rollers to make sure they’re firmly tightened. Check the condition of all cables to make sure they’re not worn or frayed. Lubricate rollers and springs with a garage-door lubricant (see How to Fix a Noisy Garage Door for maintenance and problem-solving tips). The door should operate smoothly and be properly balanced. Check the balance by disconnecting the opener and lowering the door halfway- the door should hold its position. If it doesn’t, adjust the spring tension or replace the springs.
Sectional: Also known as a raised panel door, this door is the most common. It is made of several horizontal panels hinged together, fitted with wheels and mounted within a track. The biggest advantage of this door is it takes up relatively little space and easily controlled with a standard remote garage door opener for a nominal cost. Their moving parts are readily accessible which can keep repair costs low. The average cost for sectional door repairs is $128.
We have had many concerns with our garage opener unit both safety issue and sleepless nights. At this time we are pleased that so far the unit is operating as it should.Hopefully we hope the issue of the unit opening by it self at early morning hours is solved. And if this is so, we want to Thank all involve in bring a satisfactory solution to this nightmare.
Always good to hear that our technicians are keeping up our Rockstar standards. We like to hold our communication with all clients or potential clients at a top priority. We will always do our best to respond and give our best options and solutions for anything garage door related. Please feel free to contact us with any future garage door needs. Read more

best and local garage door repair


Hiring a professional to handle garage door spring repair and replacement tends to be a much easier and safer option for homeowners. Removing or repairing garage springs can be a dangerous job, but professionals have the experience and equipment to do it safely and efficiently. Unless your springs only need a minor repair, such as lubrication or fixing a minor balance issue, be sure to call in a local garage door pro to do the job.
If you find yourself with a broken garage door cable, it’s a good idea to leave your garage door alone until a professional arrives to fix the issue. Opening and closing a garage door with a broken cable could cause more damage to the door, resulting in a more expensive repairman visit. No matter the level of the damage, you should definitely leave it up to a professional to avoid any injury.
I'm looking about spanning 15' for a gazebo. trying to figure out what dimension beams I need. The Gazebo will be 15'x10'. How big will the beams have to be. at 1/2 the distance on 15' I will have a perpendicular beam running to carry 2x4's running parallel to 15' beam edge. I live in California in there with be no roofing material.. I will be using redwood for lumber Thanks

how much are garage door hinges


Installing an overhead garage door requires a few tools and a friend to help. First, the lower door panel needs to be set up in the center of the doorway. The remaining panels and tracks are held in place with hinges, brackets, and screws. Set up an easy-to-install torsion spring system to ensure that your door lifts properly for many years to come.

sears garage door repair service


As you can see, there can be all sorts of reasons for a broken garage door . If your garage door is not working correctly, please feel free to contact the A1A Overhead Door Company at (904) 821-8463 today! Our technicians are skilled at new garage door installations, garage door repairs, spring replacement, installing and repairing garage door openers, and more.

precision garage door repair


So, why did my cable break? These cables move every time the door is operated and travel over a system of pulleys or wind on a cable drum or spool. Over time this part may wear from use or deteriorate from moisture near the bottom of the door. Should a pulley be suffering from faulty bearings it may also accelerate the wear. Should the door be out of adjustment the cable may be rubbing on other hardware items such as the track which will also accelerate wear. A visual inspection will often allow a cable to be replaced before it fails. Look for signs of corrosion, rust, fraying or excessive wear.

how much for overhead door


Traditional One Panel: These doors consist of one large panel which tilts to open by employing a spring mechanism to swing upward. The wood version is popular in the South and Southeastern US, where a milder climate keeps the wood from rapidly deteriorating. Traditional garage door designs include Cape, Colonial, Ranch, Tudor and Craftsman. The disadvantage is these doors require a lot of clearance to operate correctly. Sometimes repairs can be difficult because of the heaviness of the door or its inaccessibility. Average cost to repair tilt-up doors is $172.
When a torsion spring is wound up, it grows 2” in length. This is because the spring starts to compress and the metal has to go somewhere. After the spring is wound, the winding cone is clamped down on the torsion shaft so it can turn the drums to wind the cables as the door goes up. Since the end of the spring is “set” on the shaft, a two-inch gap is left when the spring break's. This is the most definite way of determining you have a broken garage door spring.

how much for garage door lock


  Ohad and Carson are courteous and professional. I wanted to save money by using my existing steel door, which had been bolted to the garage opening and not opened for years. An installer on the crew noticed a crack in the old door frame and repaired it with a steel bracket, and then they installed a complete new opener and overhead track using the existing old door. Four weeks later, the garage door still works perfectly.

how to repair garage door opener


I'm looking about spanning 15' for a gazebo. trying to figure out what dimension beams I need. The Gazebo will be 15'x10'. How big will the beams have to be. at 1/2 the distance on 15' I will have a perpendicular beam running to carry 2x4's running parallel to 15' beam edge. I live in California in there with be no roofing material.. I will be using redwood for lumber Thanks

where to buy clopay garage door replacement panels


Garage door manufacturers typically produce garage doors fitted with torsion springs that provide a minimum of 10,000 to 15,000 cycles and are guaranteed for three to seven years. One cycle is a single opening and closing sequence. Most manufacturers offer a 30,000 cycle spring. However, it is important to remember that if the weight of the garage door is increased by adding glass, additional insulation, or even several coats of paint, the life of the torsion spring may be greatly reduced. Additionally, springs at highly humid environments, such as coastal regions tend to have a significantly shorter cycle life, due to the corrosive cracking.
If the door has come off its tracks in either the open or closed position, leave it in place. Attempting to close or open the door could result in the cables and springs also breaking. If the door is just being noisy, you need to have the rollers replaced and the tracks cleaned. Often, stuck rollers are due to insufficient lubrication and excess humidity.
My garage door has been opening and not opening at times. Finally Thursday it completely shut down on me. Sent them a message for a quote, and Daniel got back to me with in five mins. Diagnosed the problem for me and offer to be here early morning to help me get my car out of the garage so I didn't have to walk my daughter to school. He arrived in the time frame he told me, introduced him self and was very professional, and friendly. Explained everything to me helped me order a new garage door to be installed on Sunday morning.

how to get garage door back on track


If you have a single-car garage, an extension spring will do the job. If you’re looking for a smoother motion and an ability to lift heavier doors, you may be better off selecting the torsion spring option. And if you have a two-car garage, your door will likely be too heavy for an extension spring. In this case, the torsion spring is the better choice.
Furthermore, newer doors come with more improved security features, helping to improve the way you protect your home and loved ones. While older doors are easy to break into, whether through breaking the lift mechanism or even using a universal garage door remote, new doors come with many redundant security features, which will go a long way in deterring even the most ingenious burglar.
This company is absolutely awesome. Ryan the technician, came out within two hours on Sunday, St. Patrick's Day. I had called other companies but they were unable to come out and fix the door until Monday. It took him about 20 minutes total time to fix the door that I had knocked off the rails and totally tweaked!! Very professional. Called to say when he would get there. Very nice folks! And it was $89! Flat fee. He also lubricated the track and my door doesn't "scream" anymore! Just the nicest guy ever and totally knows what he is doing and does it fast! They really ARE ROCK STARS!! I cannot recommend them more highly!

how much are garage door springs


Overhead garage doors weigh hundreds of pounds, and doors that are not properly maintained or which are equipped with older automatic garage door openers can be safety time bombs. All too common are the tragic stories of garage doors injuring or even killing children or pets who found themselves underneath a closing door. Modern automatic door openers with auto-stop and auto-reverse mechanisms have greatly reduced such accidents, but mishaps can still occur if the door and door opener are not properly maintained.

how much are garage door replacement panels


Whether your modern aluminum door won’t stop going up and down or your carriage style doors are broken, you can get your garage door fixed quickly if you spring into action by calling JDT Garage Door Service. We focus on offering Mesa and Phoenix residents skilled and comprehensive repair services. Rely on us to make your garage door quieter and more efficient with a better motor or to fix the broken spring that’s causing your issues. If your residential or commercial garage door is beyond repair, we can also handle the new door installation. Schedule a free consultation with JDT Garage Door Service serving Valley Wide.

how to get garage door out of manual mode


After you’ve ordered your new garage door, we’ll perform a site inspection to confirm your door size. We’ll contact you to schedule the installation, and our professional installers will do the rest. They’ll deliver your door, take down the old door, reconnect your opener if there is one, seal your perimeter and provide a final walk-through where they’ll clean up the area and haul away your old door. Additional fees for haul away may apply in some markets. We are happy to provide answers to questions you may have at the time of your garage door and opener installation.
There are a few different types of garage door cables, actually, depending on the type of spring system you have. If you have torsion springs in your garage, then there are torsion spring cables that loop at one end and have a crimped stop at the other end. These cables must be secured and wound in a particular way.  Some garages have extension springs that run along either side of your garage door, and these springs, of course, require particular extension spring cables. The next types of cables are the safety cables that are used with extension springs, running through the center of the springs to prevent any damage or injury if the spring were to snap.
While it would be wonderful if door springs lasted forever, the reality is that the simple act of opening and shutting the door multiple times every day isn’t easy. It’s hard on the springs, even though they’re built to do it. Most springs will last for a while, but they won’t last forever. The regular wear and tear of endlessly opening and shutting the door breaks them down and eventually, they’ll need to be replaced.

top notch garage door repair


I called Molina garage door service in the late afternoon regarding a door that was off the rails. Within 2 hours Daniel showed up to the property and had everything fixed in a short period of time. Although My only interactions with Daniel were via the phone, he was very professional and explained everything well. Everything was done for a fair price. Will highly recommend.
Our garage door springs busted at 8:30am on Sunday and Ryan & Willy came at 11:45am. Yes, on a frickin Sunday! Not only did they fix my busted door, they fine tuned and greased the other doors too at no charge. They left at 12:30pm in the 45min they told me it was going to take. Did I mention that the time they told me they were coming was from 12-3pm? I wish everyone worked this way. True 5 star rating. It's almost Amazonish.

Garage door spring snapped.  Called 4 companies for best price, best springs and longest warranties on parts and labor.  Search no further, Rockstar Garage had it all.  Manager, Louise, gave me a incredible deal and had service tech, Willie, out to my home same day, within 2 hrs!!  It was pouring rain too!  Willie went above and beyond to tune up my door, lube it and showed me some tricks to save more $$ in the future.  Just a class act all the way around!


Rolling sectional overhead garage door spring replacement should cost somewhere between $195 to $300 for a quality set springs (50000 cycle rating). This price will very if the garage door repair company charges a service call fee (trip charge). The most important thing to consider along with price is the quality of the springs and the warranty. There are any company that we use lower or mid quality springs and charge on the higher end because they include a lifetime warranty on the springs. The catch is that this warranty will only covers the spring for life and labor only for 30 days to a year. Look for a company that offers a equal parts and labor warranty. This insures that the warranty represents the rating of the springs that are being installed. For instants, you may buy a 1500 cycle rated spring set (last 3 years +or-) for $200 with a lifetime warranty and 1 year on labor. When a spring brakes after 3 year the spring its self is covered but the labor cost to replace the warranty spring can be between $65 to $100. This can add up over the year as the warranty will not restart at the time of the warranty replacement. On the offer hand, if you purchase a set of springs rated at 50000 cycles (last 10 year +or-) for $270 with a 10 year parts and labor warranty and a spring brakes in 8 years it would be replace at $0 cost. A must batter value! Always check service company review and get the details on the quality of springs a garage door repair company uses and the warranty, part and "labor".
×