Lower the door and dismantle it by removing the hardware. Lower a double door by recruiting at least two helpers to help with the weight, and place a 2×4 block under the door to prevent smashing a foot or finger when it’s lowered. Remove the sections one at a time by disconnecting the rollers and brackets. If you have windows, tape them to help control flying shards if they break. Then remove the old roller tracks and remaining hardware.

Inspect your garage door cables often for fraying or kinks. Don’t forget to inspect the pulleys as well, as they can get worn out. If you find an area that is frayed, follow the cable’s path to see what could be causing the damage. There might be something sticking out that is damaging the cable, and you can remove the protrusion before it causes further damage. Keeping your cables clean is important to their health, as well. Remove any debris and keep your cables free of lubricants since they can attract dirt and grime, which can eventually cause your cables to stop working properly.

should you tip garage door repairman


If you have a steel door, but want the look of a wood one, it is not necessary to change your entire garage door. Often, it may be possible to mimic the look of wood with skillful painting. Your local home improvement store may be able to provide good advice about the type of paint and brushes needed to mimic the look of wood for your particular door material.

We at Columbia Best Garage Door Repair in Columbia MD are also homeowners, we are aware of how frustrating it is to have something in your home malfunction and want to have it repaired as soon as possible. That is why we have built a team of technicians that can respond quickly and have your garage door repaired in a matter of hours! Our technicians are equipped with almost every part required to repair any garage door problem. Once our technicians arrive, they will assess the problem and repair it in the same visit. If you encounter issues with your garage door, it is recommended to call a garage door company in order to prevent further damage to the rest of the garage door system.

how much should it cost to repair garage door springs


I'm getting a good laugh on all the comments on "Garage Door Nation" on how easy they or people make it sound to order and change out their torsion springs. First off, if you do your shopping, the savings is about $50 - $75 having a company do it. Is it worth the 3 days wait without the use of your garage door, the safety risk and your time doing it yourself? If yes, then go for it!

Ryan came to our house the same day and efficiently resolved several issues we had with our garage door, including providing additional reinforcement to the door. He also took the time to show us features we weren't aware of. Very responsive, reasonably priced, friendly, and completely professional -- highly recommended. Thanks! And these guys are rockstars. When Ryan called, I thought I was talking to Chris Lord-Alge for a second...

Providing overhead door sales, service, and installation, to the San Antonio area including the following cities and counties: Adkins, Atascosa, Boerne, Converse, Elmendorf, Helotes, Macdona, Saint Hedwig, San Antonio, Universal City, Von Ormy, Comal County, Bulverde, Canyon Lake, Fischer, New Braunfels, Spring Branch, Guadalupe County, Cibolo, Geronimo, Kingsbury, Marion, Mc Queeney, Schertz, Seguin, Staples, Kendall County, Bergheim, Comfort, Kendalia, Waring, Kerr County, Center Point, Hunt, Ingram, Kerrville, Mountain Home, Fredericksburg, San Marcos
If your garage door goes up and down in a jerky motion, you might have one broken spring on a two spring system. Some garage door openers are strong enough to lift a door with only one good spring. The “herky jerky” motion is especially common with garage doors equipped with extension springs. It might be something as simple as lubricating your garage door pulleys, hinges, and rollers. When in doubt or if something doesn’t feel right about your door, call a service company to have it serviced.
A1 Garage Door Service is the trusted service provider in installing, servicing and repairing all kinds and types of garage doors. We encourage you to check out the reviews of the people of Phoenix and Gilbert on the kind of garage door service that we provide. Our customers have consistently given us A+ ratings on BBB, 5-star ratings on Yelp and the Super Service Award on Angie’s List to express their satisfaction on our service. 

can a bent garage door be repaired


I was so impressed how quickly Precision came out and repaired my garage door. The main spring popped and broke the night before and I could even get my garage do open....I called them at 7:30 am the very next morning and they had a technician out within an hour. They installed a new spring and some additional rollers etc....that was needed. Thanks Precision, you have earned my respect.
Adding a new garage door provides a dramatic difference in your home’s appearance. When neighbors pass by, when guests pull up, or when you return from work, your house will have a distinct beauty that makes it a landmark of the neighborhood. The unique look you’ve always imagined — as well as the material, the finish, and the insulation can be found in our wide selection of garage doors.
Perfect name for a FANTASTIC company! These guys are definitely ROCKSTARS!!! Our garage door stopped working late one evening (the perfect time for something to break, right?!?!). I found Rockstar Garage Door after calling another company who left me in the lurch for over 2 hours with zero help. I am SO thankful I called Rockstar. Ryan talked me through some troubleshooting ideas. When those didn't work, he hopped in his truck and came right over (he even called back to give me an accurate ETA based on his GPS). He got the door closed for us that night so safety and security weren't a concern and scheduled an appointment for the following day. On the day of our appointment, Ryan arrived early (after calling to confirm it'd be ok to do so). He fixed all the issues we were having with efficiency (we needed a new motor) and tripled checked everything. Ryan was professional, personable and answered all the questions I had. He walked me through the new setup making sure I understood how everything worked before leaving. Service was prompt and reasonably priced. I couldn't ask for better service and definitely recommend using this company. Thanks Ryan (and Rockstar Garage Doors)!!

how much cost garage door replacement


If you find yourself with a broken garage door cable, it’s a good idea to leave your garage door alone until a professional arrives to fix the issue. Opening and closing a garage door with a broken cable could cause more damage to the door, resulting in a more expensive repairman visit. No matter the level of the damage, you should definitely leave it up to a professional to avoid any injury.


Carriage: These doors mimic the look of doors found on old carriage houses in the days of horses and buggies. Because of their rustic look, they are often favored in the West and Southwest of the United States. The doors swing open like oversized French doors and hang from jambs on hinges. With their unique look, they create an area of visual interest for your home and are quite energy efficient. The downside is they require a considerable amount of clearance to work properly. Because most carriage garage doors are largely composed of wood, you may need to replace deteriorating or rotting door materials. The average cost for carriage garage door repairs is $133.
For Sears Garage Door Installation and Repair Services, making your garage door safe is as important as making it function well. For this reason, all of our repair services and tune-ups feature a 20-point safety check. Our technician will carefully examine your garage door panels, springs, sensors, safety release, hardware, track, and more. This ensures that, not only has our work been done well, but that your garage door poses no danger to your vehicles or family. Due to the intricacy of garage door systems, only garage service professionals should attempt to adjust, repair, or service door equipment.

how to garage door cable


We specialize in all forms of garage door services, including broken spring repair, broken garage openers, and more. Garage doors are one of the more complicated parts of your home, and can be dangerous if they malfunction. Call Hill Country Overhead Door today if you’re concerned about the status of your garage door. We will send expert technicians to inspect your garage door, and you won’t need to pay us anything until you schedule your service.
Garage Door Installation – This includes the installation of a new garage door. Includes the door itself, the track, cables, springs, hinges, handles, locks and rollers. It is the complete service and installation of a new door. We inspect all the parts, make adjustments to fit your garage opening, and service all elements during the installation process. Plus, we check to ensure all parts are in proper working order after installed.

how to repair dent in garage door


While you can certainly redo any security features on your garage door, it is often wise to replace the entire door if in fact that is the way a burglar gained access to your house. A new security code may seem like enough, but you don’t know how the thief figured out the old code in the first place. If the motor was disengaged, the issue might be a design flaw in the door itself. The best way to ensure that the thief doesn’t return or another thief doesn’t take advantage of the same unknown security weakness is to install a new door. Again, doing so with give you access to the kinds of robust security features that are being installed and implemented in the newest garage doors on the market.

how to garage door insulation


This technician was very competent and performed the services in an outstanding manner. He also suggested additional items needing work on our garage door opener so that it performs much better. It also appears I ordered the wrong door openers, but he was able to input the correct code so that we can use them. We were very satisfied with all of his services.
A torsion spring counterbalance system consists of one or two tightly wound up springs on a steel shaft with cable drums at both ends. The entire apparatus mounts on the header wall above the garage door and has three supports: a center bearing plate with a steel or nylon bearing and two end bearing plates at both ends. The springs themselves consist of the steel wire with a stationary cone at one end and a winding cone at the other end. The stationary cone is attached to the center bearing plate. The winding cone consists of holes every 90 degrees for winding the springs and two set screws to secure the springs to the shaft. Steel counterbalance cables run from the roller brackets at the bottom corners of the door to a notch in the cable drums. When the door is raised, the springs unwind and the stored tension lifts the door by turning the shaft, thus turning the cable drums, wrapping the cables around the grooves on the cable drums. When the door is lowered, the cables unwrap from the drums and the springs are rewound to full tension.[7]
However, if you are confident that you don’t just need new batteries, make sure to call a professional. A service person with a lot of experience will be able to look at the problem and quickly diagnose the issue, saving you precious time. Again, while you may be able to save money in the short term by taking a day off and troubleshooting the problem yourself, the amount of energy and time lost as you search out the issue will quickly surpass the cost of a professional repair.
Torsion springs have three advantages over extension springs: They’re quieter, safer and easier to fine-tune. Torsion springs are quieter because you don’t have a spring knocking against a roller track. They’re safer because when a spring breaks, it usually stays on the bar. Finally, you can fine-tune the tension on a torsion spring so the door is perfectly balanced. Setting the tension on torsion springs has always been very dangerous, but torsion and extension spring systems with easy, do-it-yourself tensioning (Photo 7) are available. If you don’t use one of these DIY-friendly, easy tensioning systems (Clopay EZ-Set Spring and Wayne-Dalton TorqueMaster are two brands), you should hire a professional to release and set the tension on a torsion spring.
×