Good response time and service; Question - I googled to find the Sears Garage Door repair phone number. During the conversation, I was unsure if this was "Sears" or a "contractor service" or other service. I had to ask if this repair person was coming from "Sears" or an independent repair. I was concerned until the service man arrived in a sears truck wearing Sears apparel. You might want the process to be more clearly identified as Sears.
When rust forms on the garage door springs it can cause the springs to easily break and the life cycle of them to be shortened. Rust causes friction on the coil and weakens it as well. You can prevent spring breakage due to rust by spraying down the coil with a lubricant every few months (we can provide this), which keeps it both lubricated and from building up with rust.
Sears garage repair technicians are fast, with same-day, emergency repairs available in most areas. We can replace garage door broken springs, rollers, cables, hinges, sensors and weather seals. We can also adjust garage door tracks and springs to make sure your door operates smoothly. Having problems with your garage door opener? We can repair or replace that too. Check out our line of Craftsman Garage Door Openers. Craftsman is America’s #1 brand of garage door openers! 1 

wayne dalton garage door repair


Many of the door’s components will be made from galvanized steel since it resists corrosion better than regular steel. The key thing you need to remember with steel is its gauge rating. The lower the gauge, the thicker the steel will be. For example, 12-gauge steel is thicker than 16-gauge steel. If you want superior quality, you will want to use components with a lower gauge rating. 

how much for a garage door opener remote


Step 2: Check the tracks with a level to make sure they're properly aligned. Horizontal tracks should slant slightly down toward the back of the garage; with roll-up doors, the vertical sections of track should be exactly plumb. Both tracks must be at the same height on the garage walls. If the tracks are not properly aligned, loosen but do not remove the screws or bolts that hold the mounting brackets, and tap the tracks carefully into position. Recheck the tracks with the level to make sure they're in the right position; then tighten the screws or bolts at the mounting brackets.

can garage door panels be repaired


Jerrod the technician had answers to all my questions. He was very knowledgeable and very patiently explained what was going on with my garage door and the opener. I would definitely recommend A1 garage door service to friends and family. I was given options to either repair the door or replace it. I will get the door replaced when it gets non-functional from A1 garage door service.

I called Molina garage door service in the late afternoon regarding a door that was off the rails. Within 2 hours Daniel showed up to the property and had everything fixed in a short period of time. Although My only interactions with Daniel were via the phone, he was very professional and explained everything well. Everything was done for a fair price. Will highly recommend.

jerry garage door repair


A standard double garage door is 7 ft. high by 16 ft. wide. Standard single doors are 7 ft. high by 8 or 9 ft. wide. Because the doors are so large, few home centers and only some garage door stores keep many doors in stock, so expect to order one instead of buying it off the shelf. Garage doors are available in wood, fiberglass and steel. Steel doors, like ours, are light, maintenance-free, affordable, readily available, and have an insulating value as high as R-19.
Whether your modern aluminum door won’t stop going up and down or your carriage style doors are broken, you can get your garage door fixed quickly if you spring into action by calling JDT Garage Door Service. We focus on offering Mesa and Phoenix residents skilled and comprehensive repair services. Rely on us to make your garage door quieter and more efficient with a better motor or to fix the broken spring that’s causing your issues. If your residential or commercial garage door is beyond repair, we can also handle the new door installation. Schedule a free consultation with JDT Garage Door Service serving Valley Wide.

how much are garage door


If your garage door is equipped with only one torsion spring, it will be much harder to get your door open. You will need to get 2-3 people to help lift the door up because the full weight can be anywhere from 150 to 300 pounds. We don’t recommend lifting the door when the spring break's due to the danger of it falling on someone. If you absolutely must get your garage door open, raw strength is what you need. When you get the door in the up position, use vise-grips or a c-clamp on the track below the bottom roller to hold the door in the up position.

how much for garage door spring repair


Of course my garage door cables decided to snap at 5 PM on a Friday, leaving my garage door partially open. I searched yelp and started making calls and leaving voicemails and i figured i was out of luck. Daniel called me back and I told him what happened. Long story short, he showed up in an hour and fixed the cables and even tuned up my garage door. Not only is my garage door fixed, it's a whole lot less noisy and opens and closes smooth unlike before. Daniel was extremely friendly and he came last minute which saved my weekend. I highly recommend Molina garage door services and will be using them from now on.

how much does a garage door repairman cost


Installing an overhead garage door requires a few tools and a friend to help. First, the lower door panel needs to be set up in the center of the doorway. The remaining panels and tracks are held in place with hinges, brackets, and screws. Set up an easy-to-install torsion spring system to ensure that your door lifts properly for many years to come. 

top garage door repair


Welcome to Door Doctor, Inc. located in Sterling, VA.  We provide garage door installation, repair, and garage door opener services throughout Northern Virginia, Maryland and Washington, DC.  We have been in business for over twenty years.  We are a Authorized dealer of Amarr, Clopay, C.H.I., Wayne-Dalton, Artisan, and Carriage House Door Company garage doors and Lift-Master garage door openers.
This is the #1 reason why garage door springs fail or break! The average, properly installed torsion springs will last for approximately 10,000 cycles. A cycle is when the garage door goes up and then goes back down. Even if you were to only leave and come back once throughout the entire day, that still equates to two cycles per day or 730 in a year. That being said a garage door spring would only last for a little over 13 ½ years. However, most people open and close the door many times throughout the day, running many cycles, shortening that life span to far less than 13 ½ years. It is even possible to go through 10,000 cycles in about a year! 

can you repair a bent garage door


You can choose from three basic types of steel door: (1) steel only; (2) steel with insulation on the inside; and (3) steel on both sides with 1-3/8 to 2 in. of insulation. Other features that add to the cost are thicker insulation and windows, especially insulated windows. The do-it-yourself tensioning systems also add a little to the door’s cost. Be sure to specify exactly what you want.
Garage door springs come in two styles: torsion (see above), which mounts on the header above the door, and extension (Photo 1), which floats above the upper roller track. In the past, extension springs were safer to install but didn’t have containment cables running through the center of the spring. Without cable, these springs become dangerous, heavy whips when they break. They also tend to be noisier than torsion springs, and we recommend you use them only if you don’t have the 12 in. of headroom above the door that a torsion spring requires. 

how much for garage door springs


  Ohad and Carson are courteous and professional. I wanted to save money by using my existing steel door, which had been bolted to the garage opening and not opened for years. An installer on the crew noticed a crack in the old door frame and repaired it with a steel bracket, and then they installed a complete new opener and overhead track using the existing old door. Four weeks later, the garage door still works perfectly.
Finally, we also carry any and every residential garage door product that you need to have a state-of-the-art, secure and safe garage door. We are proud certified dealers of Clopay doors, the most durable and versatile doors on the market. With over fifty years of garage door manufacturing experience, you can trust Clopay quality, just as you can trust our team to install these highest-quality doors.
If your garage door is equipped with extension springs (usually seen on single car garages), the cable and pulley might be hanging down when the spring break's. Extension springs use a two pulley system on each side of the door to lift the garage door up and down. When the spring break's everything goes haywire, causing the cables to become twisted or even frayed when they catch on the metal edge of the track. There is a lot of force being released when a garage door spring breaks.
Everyone wants to save money. Unfortunately, there are some areas you just can’t skimp on. This includes garage door springs. As much as it might be tempting to by smaller or cheaper springs, or maybe to buy one spring where two are needed, these attempts to save money will only end up costing more money in the end. When you buy the proper springs, they’ll last for years. When you cut corners to save money, the springs will wear out faster, meaning they’ll need to be replaced much sooner.

residential garage door repair


  Last night (Sunday), my garage door would not open. After some basic attempts to figure out what was wrong, I stopped when I noticed one of the springs had broke. Since I've had a bad experience with those major garage door repair companies, I decided to come to Yelp to look for a local service provider to replace the spring(s). Turbo was ranked near the top (5 stars) and had one of those handy "request a quote" buttons so I wouldn't have to call anyone on a Sunday night or holiday (next day) to get this repaired. I submitted my request and within 10 minutes, Ohad called to talk about the repair. He gave me an estimate of the cost and we scheduled a time for the next day for him to come out. 

Steel entry doors - when a garage is being fitted with new doors, it is also a good idea to consider a separate single 3x68 exterior door with half-glass and locksets too. These may require some carpentry, but they are a good way to allow for some flexibility in the choice of larger garage door, and can ensure that the homeowner will have more than a single way in or out of the structure. The average costs for such a feature range from $250 to $1000 each.

When the lay-person typically sees a circuit board, they immediately seize up and think that's it's too advanced for them to fix. In reality, replacing circuit boards for the Chamberlain Liftmaster, Sears, and Craftsman garage door openers is relatively easy with proper instruction. This video will walk you through the process of replacing the circuit board on a Chamberlain Liftmaster, Sears, and Craftsman garage door opener.
The average lifespan of torsion springs is determined by its cycle count. Garage Door Medics provides springs with an average of 25,000 cycles and we can provide custom size springs for any door. The industry standard is 10,000 cycles. When a garage door is used more frequently, the springs may not last as long. If you begin to see signs of wear, it’s time to give Garage Door Medics a call!

should i repair or replace my garage door


In order to replace your garage door spring(s), you will need to find the current measurements in order to accurately replace the spring(s). This should take about 3 minutes and you don't need to remove the springs or loosen the tension to measure them. Our springs are made to be a bit flexible, so you don't have to get it to an exact measurement. 
If your garage door is equipped with only one torsion spring, it will be much harder to get your door open. You will need to get 2-3 people to help lift the door up because the full weight can be anywhere from 150 to 300 pounds. We don’t recommend lifting the door when the spring break's due to the danger of it falling on someone. If you absolutely must get your garage door open, raw strength is what you need. When you get the door in the up position, use vise-grips or a c-clamp on the track below the bottom roller to hold the door in the up position.

how much for garage door spring repair


We at Columbia Best Garage Door Repair in Columbia MD are also homeowners, we are aware of how frustrating it is to have something in your home malfunction and want to have it repaired as soon as possible. That is why we have built a team of technicians that can respond quickly and have your garage door repaired in a matter of hours! Our technicians are equipped with almost every part required to repair any garage door problem. Once our technicians arrive, they will assess the problem and repair it in the same visit. If you encounter issues with your garage door, it is recommended to call a garage door company in order to prevent further damage to the rest of the garage door system.

how much should it cost to repair garage door springs


Finally, we also carry any and every residential garage door product that you need to have a state-of-the-art, secure and safe garage door. We are proud certified dealers of Clopay doors, the most durable and versatile doors on the market. With over fifty years of garage door manufacturing experience, you can trust Clopay quality, just as you can trust our team to install these highest-quality doors.

metro garage door repair


If your garage door is equipped with only one torsion spring, it will be much harder to get your door open. You will need to get 2-3 people to help lift the door up because the full weight can be anywhere from 150 to 300 pounds. We don’t recommend lifting the door when the spring break's due to the danger of it falling on someone. If you absolutely must get your garage door open, raw strength is what you need. When you get the door in the up position, use vise-grips or a c-clamp on the track below the bottom roller to hold the door in the up position. 

how much for garage door spring repair


Our team of friendly, knowledgeable technicians have the industries best experience replacing broken springs on garage doors. Replacing a garage door spring can be very dangerous, and we highly encourage you to contact us to handle this repair today! If you have a high cycle application, our garage service team may be able to provide extended use high cycle springs.
This was the perfect example to how a business should be ran on every level. I called the owner at 545 am and not only spoke to him but scheduled for later that day. The technician arrived on time, was knowledgeable, personable, and professional. He explained the issue at hand and how to fix it with quality parts that will ensure the function of the door and, springs, and motor. I could not be happier with the experience and service. Rockstar garage door service is not just a great name, it's the truth. It would be foolish to give business to anyone else. And... if all of this wasn't enough. They cover all of San Diego County. Thanks guys!
×