So, why did my cable break? These cables move every time the door is operated and travel over a system of pulleys or wind on a cable drum or spool. Over time this part may wear from use or deteriorate from moisture near the bottom of the door. Should a pulley be suffering from faulty bearings it may also accelerate the wear. Should the door be out of adjustment the cable may be rubbing on other hardware items such as the track which will also accelerate wear. A visual inspection will often allow a cable to be replaced before it fails. Look for signs of corrosion, rust, fraying or excessive wear.


When the lay-person typically sees a circuit board, they immediately seize up and think that's it's too advanced for them to fix. In reality, replacing circuit boards for the Chamberlain Liftmaster, Sears, and Craftsman garage door openers is relatively easy with proper instruction. This video will walk you through the process of replacing the circuit board on a Chamberlain Liftmaster, Sears, and Craftsman garage door opener.
In addition to the bodily risk involved, it’s simply not an easy task. There’s the possibility that you will not install it correctly. At worst, this creates the risk that the mechanism will fail at the wrong time and injure you or someone in your family. At best, this means it will malfunction, and you’ll have to call professionals to fix it. It will save time, money and potential heartache to simply call a professional to install your new door springs correctly the first time.
When you install a new garage door, replace all the hardware as well. If your automatic opener doesn’t have an automatic reversing system that includes photoelectric eyes, replace it. Doors with openers also require two extra pieces of hardware that you’ll see in Photo 4: a support strut (usually included in the door kit) and an opener bracket (not included). For doors with torsion springs located over the door, spend the $50 or so to have a garage door professional release the tension.

Repair Sagging Garage Doors – As doors and homes age, they can shift and move and sometimes this results in a garage door that needs to be realigned or reinforced. We will send a technician to your home to adjust the doors and to inspect the entire opening to make sure the door isn’t damaged. Once we understand the problem, we will fix the needed parts and make any adjustments to the door.
Springs: Springs are an essential part of the counterweight system used in garage doors. This system is what makes it possible to open and close the door with one hand. Springs are typically one huge coil at the top of the door. Some designs also have secondary springs located over the door tracks. Secondary springs are more common on heavier styles of doors.

i want to buy garage door opener


If you have a Wayne Dalton TorqueMaster system (pictured below), the springs will be inside a tube. The only way to determine if one is broken is to lift the garage door manually. If the door is heavy (roughly 60lbs for a double car door), you most likely have a broken spring inside the TorqueMaster tube. Another way to tell if you have a broken spring in your Wayne Dalton Torquemaster tube is if the door goes up and won't go back down.

can a garage door be repaired


Self-storage roll-up doors operate in a similar manner to steel-rolling door springs. Like a steel rolling door, the curtain on these doors wraps around itself as the door opens. The primary difference, however, is that steel rolling doors are made of interlocking slats, while self-storage roll-up doors are just one piece of steel. While steel rolling doors are typically found in heavier commercial and industrial environments, self-storage roll-up doors are common in self-storage facilities.

how much for garage door spring replacement


Our garage door springs busted at 8:30am on Sunday and Ryan & Willy came at 11:45am. Yes, on a frickin Sunday! Not only did they fix my busted door, they fine tuned and greased the other doors too at no charge. They left at 12:30pm in the 45min they told me it was going to take. Did I mention that the time they told me they were coming was from 12-3pm? I wish everyone worked this way. True 5 star rating. It's almost Amazonish.
Springs are one of the primary components in all garage door systems. Torsion springs are usually mounted horizontally over the door opening. As the door closes, cables add tension to the springs and as the door opens that tension is released. The opening of the door causes the springs to unwind in conjunction with the weight coming off the door. This achieves a natural buoyancy. However, as the door moves up and down over time and the cycle count rises, the steel in the torsion springs will grow weak and will no longer be able to create energy or lift your garage door.
Lower the door and dismantle it by removing the hardware. Lower a double door by recruiting at least two helpers to help with the weight, and place a 2×4 block under the door to prevent smashing a foot or finger when it’s lowered. Remove the sections one at a time by disconnecting the rollers and brackets. If you have windows, tape them to help control flying shards if they break. Then remove the old roller tracks and remaining hardware.
Does your garage door close part way then reopen? Does the door bind and stick? Are there scraping sounds as your door opens and closes? In my 30 years servicing garage doors I have found these symptoms to be some of the more challenging for do-it-yourselfers to diagnose. One major cause of failure for garage doors using extension springs is that the pulleys wear out.

Annual maintenance. Make an annual check of all nuts and bolts on rails and rollers to make sure they’re firmly tightened. Check the condition of all cables to make sure they’re not worn or frayed. Lubricate rollers and springs with a garage-door lubricant (see How to Fix a Noisy Garage Door for maintenance and problem-solving tips). The door should operate smoothly and be properly balanced. Check the balance by disconnecting the opener and lowering the door halfway- the door should hold its position. If it doesn’t, adjust the spring tension or replace the springs.

Our garage door springs busted at 8:30am on Sunday and Ryan & Willy came at 11:45am. Yes, on a frickin Sunday! Not only did they fix my busted door, they fine tuned and greased the other doors too at no charge. They left at 12:30pm in the 45min they told me it was going to take. Did I mention that the time they told me they were coming was from 12-3pm? I wish everyone worked this way. True 5 star rating. It's almost Amazonish.

broken spring garage door repair


Sure, wear and tear can eventually cause the garage door springs to break down. But, by practicing proper maintenance you can prolong the spring’s life. The first thing to do is spray down the coil with lubricant at least three times every year. Additionally, you should check up on the garage door balance every season. We have found that most people have spring failure issues in the winter, so checking it more frequently during that time is recommended.


Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
The following instructions can be followed by most do-it-yourselfers. You will need a second person to help you at the beginning of this tutorial to raise the door so that you can replace your torsion springs. These instructions are for replacing two springs on a self-storage roll-up door, also known as a mini-warehouse curtain door, that have the typical self-storage style loops on each end of the springs.
While it would be wonderful if door springs lasted forever, the reality is that the simple act of opening and shutting the door multiple times every day isn’t easy. It’s hard on the springs, even though they’re built to do it. Most springs will last for a while, but they won’t last forever. The regular wear and tear of endlessly opening and shutting the door breaks them down and eventually, they’ll need to be replaced.
These guys seriously are rockstars! I came home to a broken garage. I called several garage door companies that were still open and Rockstar was the only place that actually picked up. They were able to immediately come in 20 minutes. Ryan came and replaced my spring and even checked on other parts of my garage. The garage door wasn't installed properly from the beginning so Ryan fixed all the issues to make sure it was in perfect condition and standards. Excellent and prompt service, reasonably priced, and detail oriented work! I highly recommend Ryan and this company for your garage repairs.
If you pull the red emergency release rope on your automatic opener and you still can’t lift the garage door, you probably have a broken spring. The counterbalance spring is what lifts the garage door, not the garage door opener. If the spring is broken, the door is dead weight. A garage door can be lifted, but it is going to require some muscle to get it up. It is also important to lift the door evenly so it does not jam in the tracks.

how to garage door seal replacement


The following instructions can be followed by most do-it-yourselfers. You will need a second person to help you at the beginning of this tutorial to raise the door so that you can replace your torsion springs. These instructions are for replacing two springs on a self-storage roll-up door, also known as a mini-warehouse curtain door, that have the typical self-storage style loops on each end of the springs.
×